Heavy Duty Truck Diagnostic Tool Scanner DPF Regen Oil Reset OBD2 Code Reader

Heavy Duty Truck Diagnostic Tool Scanner DPF Regen Oil Reset OBD2 Code Reader. NL102PLUS HEAVY DUTY diagnostic scanner from NEXAS supports all heavy duty trucks in compliance with standard protocols (J1587, J1939 and J1708 Class 4- class 8 trucks). And also engine check diagnostic for all passenger cars & light duty vehicles. Support Multi-Brands Heavy Duty Trucks with standard protocols J1587, J1939 and J1708 : for Cummings, for Detroit, for Maxxforce, for Caterpillar, for Freightliner, for International, for Kenworth, for John Deere, for Peterbilt, for Sterling, for Mack, for Paccar, for Westernstar, for Volvo, for Scania, for Man, for Renault, for ERF, for Foden, for Seddon-Atkinson, for Iveco, for DAF, for SISU, for STEYR, for ISUZU; and all Cars/ mini truck/ light duty. Supported most of HD Truck Systems Diagnosis : engine, transmission, instrument panel, drivetrain, braking system, suspension, ABS, ESP, EPS, fuel system and more, which are in compliance with J1939, J1708 and J1587 protocols. Generally for American HD trucks (Class4-Class8) are from 2006 on. Oil light/ Service reset : work. For Cummins, Sensor Reset for Detroit, Maxxforce after 2010. Regenerate DPF (Diesel Particulate Filter). For Maxxforce, Detroit, Cummins, ISUZU, HINO HD Truck.

Support Check OBDII/EOBD Engine fault for 12v vehicles. Diagnose heavy duty trucks in compliance with standard protocols (J1587, J1939 and J1708). Work on all cars, mini vans and light duty vehicles (OBDII & CAN) from 1996 on and latest - European, American and Asian. Support all OBDII protocols: CAN, J1850 PWM, J1850 VPW, ISO9141 and KWP2000.

Oil light/ Service reset : work for Cummins, Sensor Reset for Detroit, Maxxforce after 2010. Regenerate DPF (Diesel Particulate Filter), Identify DPF fault codes for Cummins, for Detroit, for Maxxforce, for ISUZU, for HINO, for Kenworth, for Peterbilt, for Sterling, for Western Star, for Freightliner, for International after 2010. Uniquely featured with battery power monitor function. Troubleshooting tips guide technicians to the root of problems faster, saving diagnosis and repair time. Easily determine the cause of the Check Engine Light(MIL) and turn off Check Engine Light (MIL), clear troubles codes and reset monitors. Display DTC definition, freeze frame data, I/M readiness status (emissions) and vehicle information (VIN, CIN and CVN). Read, store and playback live O2 sensor test data. Read PCM live data stream with graphic data Display. Multilingual menu and DTC definitions: English, Spanish and French. Support 6PIN, 9PIN (trucks), and 16PIN(cars & trucks) diagnostic connectors. DPF support the following engines from 2010 to Now. Maxxfforce Engine: DOC Cleaning Procedures, DPF Regeneration, DPF Onboard. Detroit Engine: DPF Regeneration in Parking, DPF Regeneration in Driving. Commins Engine: Aftertreatment Diesel Particulate Filter Regeneration.

ISUZU / HINO Engine: DPF Regeneration. Sensor/Service Reset For the belowing engines from 2010 to Now. Detroit: EGR Delta Pressure Sensor Recalibration; ATD Maximum Sensor Value Reset. Please check your truck user manual to make sure your truck ECU is in compliance with J1939, J1708 and J1587 protocols. Please enter through "HD OBD" on the menu if your vehicle is Heavy Duty Truck (Class4-Class8 trucks); Please enter through "OBD/EOBD" if your vehcile is car, SUV, Mini-Truck, light super duty or other light duty vehicles.

Please let me know your truck information if you are not sure whether this scanner is compatible with your truck or not. All OBD2 Fuction Fot Truck And Car. This option is used to read the current, pending or permanent trouble codes. It is used to clear all existing trouble codes. I/M Readiness indicates whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing. Note: N/A means not available on this vehicle; INC means incomplete or not ready and OK means Completed or Monitor Ok. This item enables you to view all data stream items and the live waveform of all selected items. Some data stream have the help information, press the? When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer.

This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault. The results of O2 sensor test are not live values but instead the results of the ECU's last O2 sensor test. For live O2 sensor readings, refer to any of the live sensor screens such as Graph Screen. Not all test values are applicable to all vehicles.

Therefore, the list generated will vary depending on vehicle. In addition, not all vehicles support the Oxygen Sensors screen. This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems. The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. NL102P does not perform the leak test, but signals to vehicle's on-board computer to initiate the test.

Before using the system test function, refer to the vehicle's service repair manual to determine the procedures necessary to stop the test. This option allows you to view the relevant information of the vehicle, including VIN (Vehicle identification Number), CID (Calibration ID) and CVN (Calibration verification number). Let you perform the DPF cleaning to clear the blockage through continuous burning of the particulates captured in the DPF filter. When a DPF regeneration cycle is completed, the DPF light automatically goes off. 12V OBDII Cars /min vans / light duty.

USA vehicles :2000 and newer. Support to read and erase engine codes, turn off engine light, vehicle infoemation. Display 2.8'' TFT color display (320240). Supported Protocols J1587, J1939, J1708, CAN, J1850 PWM, J1850 VPW, ISO9141 and KWP2000.

Working Temperature 0°---60° (32---140° F). Storage Temperature -20-70° (-4-158° F). Input Power 8-36 Volts by vehicles battery.

Cancelling Your Order: Your order is important to us and will be processed immediately. And we are not responsible for order's delay or miss because of your incomplete contact information. Select the reason for the return?

We have been engaged for many years in the line of automobile diagnosing instruments and our corporation is established for the purpose of trustworthiness. We have over 4 warehouses that are located in US. We is mainly deals in various types of professional car diagnostics scanners and other car service maintenance tools.

Such as OBDII SCANNER, ODO-METER TOOL / KEY PRO-GRAMMER, SMOKE DETECTOR / PROBE CIRCUIT TESTER /BATTERY TESTER..... Suitable for COMMERCIAL VEHICLES / PASSENGER CAR /MOTORCYCLE / ATV / UTV etc. This item is in the category "eBay Motors\Automotive Tools & Supplies\Diagnostic Service Tools\Code Readers & Scanners".

The seller is "verybold2020" and is located in this country: US. This item can be shipped to United States.

Brand: NEXAS
Supported System: DPF, DPF, Oil Light Service Reset, Oil light/ Service Reset, Sensor Reset, DPF regeneration
Vehicle Type: Heavy Duty/Commercial, Passenger Vehicle
OBD Interface: CAN, EOBD, OBD, OBDII
Warranty: 3 Year
Accessories: Adapter Cable, USB Cable, User Guide
Functions: OBDII EOBD Engine Check
Type: Car Truck Nexas NL102 Plus Scan Tool
Model: NL102P
Manufacturer Part Number: nl102 plus
Connectivity: OBD
Features: Backlit Display, Built-In Battery, Check Engine Light Shut Off, Color Display, Erases Codes, Freeze Frame Displays, Internet Updateable, LCD Display, Multi-Language Interface, User Friendly
Support truck:: Covers J1578, J1939 and J1708 heavy duty trucks
Support Car: for Maxxforce, Detroit, Cummins, ISUZU, HINO ect
Main Function: HD OBD,HD DPF,HD Service
Service Function: Oil Reset,DPF Regen
UPC: 615517433816